Setting Up And Managing Novell Native File Access For Unix; Configuration Methods - Novell NETWARE 6-DOCUMENTATION Manual

Setting Up and Managing Novell Native File Access for
UNIX

Configuration Methods

ConsoleOne-Based Configuration
This section explains how to set up and manage Native File Access for UNIX.
It includes information on the following:
Configuration Methods (page 69)
Configuring Server General Parameters (page 71)
Migration (page 74)
NFS Server (page 82)
NIS Server (page 94)
Novell Native File Access for UNIX can be configured using ConsoleOne
and also by setting the file-based configuration parameters of the various
components.
To start ConsoleOne from the client, complete the following steps.
IMPORTANT:
Before starting ConsoleOne, ensure that you run NFSSTART on
the server that you want to administer.
1
Start ConsoleOne from the server where Native File Access for UNIX is
installed.
2
Click NFSAdmin and then the login toolbar icon.
3
Enter the tree name, context name, authorized username, and authorized
password.
4
Click OK.
5
Enter the hostname or IP address and then click OK.
IMPORTANT:
To log in successfully, make sure that your file server name and
hostname are the same and that you have logged in to the tree of the server you
want to administer. You will not be able to administer a NetWare NFS Services 3.0
on NetWare 5.1 from ConsoleOne on NetWare 6.
Working with UNIX Machines
TM
69