Novell NETWARE 6-DOCUMENTATION Manual page 2232

NIMS Gadget Configuration
16
NetWare WebAccess Overview and Installation
If you leave the field blank, the user will be required to enter both a username
and a password. You should use this option if the user's GroupWise username
and eDirectory username do not match.
Some additional configuration is required for NetWare WebAccess to function
properly with GroupWise WebAccess. After both NetWare WebAccess and
GroupWise WebAccess are installed on your network, do the following:
1
Copy all NetWare WebAccess templates (.HTT files) from the
SYS:WEBAPPS\WEBACCESS\TEMPLATES folder on the server
where you installed NetWare WebAccess to the directory where the
templates are installed on the server running GroupWise WebAccess.
If Tomcat is the application server used for GroupWise WebAccess, the
path where you need to copy the files to is
SYS:TOMCAT\33\WEBAPPS\ROOT\WEB-
INF\CLASSES\COM\NOVELL\WEBACCESS\TEMPLATES\TEMPL
ATES\FRAMES.
2
On the server running GroupWise WebAccess, edit the WEBACC.CFG
file and replace the line that reads
Security.UseClientIP.enable=true
with
Security.UseClientIP.enable=false.
The WEBACC.CFG file is normally found in the
SYS:NOVELL\WEBACCESS directory.
For more information on installing and configuring GroupWise WebAccess,
go to the Novell documentation Web site (http://www.novell.com/
documentation).
Provide the URL to the NIMS server. The URL was created when you
installed and configured NIMS.
There are two possible options for the Default Username field. You can enter
%cn% or leave the field blank.
The %cn% option is useful if the user's NIMS username is the same as the
eDirectory username. %cn% will cause NetWare WebAccess to get the user's
eDirectory username and automatically add it to the username field in NIMS.
The user will then not be required to enter a NIMS username, but will still be
required to enter a password.