Novell NETWARE 6-DOCUMENTATION Manual page 1768

Table 3
Menu Option
Dynamically Configure Static
Routing Tables
Configure Services from
Gatekeepers
Configure Local Static Services
Configure Local Static Routes
Write Static Routing Tables to
Permanent Storage
Restore Static Routing Tables
from Permanent Storage
Select Configuration Method Menu Options
Description
Opens an on-demand call to the remote router and allows you to edit
the local and remote configurations using dynamically obtained
selection lists.
Opens an on-demand call to obtain a list of services available from
a gatekeeper and allows you to select the services you want. The
gatekeeper is normally on the other side of a WAN link.
Lets you configure static services manually on the local router. This
configuration is nearly identical to the one presented in
Static Services" on page
Lets you configure static routes manually on the local router. This
configuration is nearly identical to the one presented in
Static Routes" on page
Sends IPX SNMP requests to the local router to put the routing table
information into permanent storage. The router is polled to ensure
that the information is updated.
Sends IPX SNMP requests to the local router to restore routing table
information from permanent storage. The router is polled to ensure
that the information is updated.
The most efficient way to configure static routes and services is to select the
Dynamically Configure Static Routing Tables option. This enables you to
select from the following options:
Autoconfigure Local and Remote Routing Tables —Exchanges all
routing and service table information automatically with the remote
router. Select this option if you want an on-demand call to obtain full
routing and service information in the static routing tables. A status
screen shows the progress of the exchange. This exchange might take
significant time to complete if you are working over a slow link or on a
large network.
Configure Local Routing Tables —Selectively configures routing and
service tables for the local router from information learned from the
remote router through IPX SNMP requests.
Configure Remote Routing Tables —Selectively configures the routing
and service tables for the remote router from information learned from the
local router through IPX SNMP requests.
55.
54.
"Configuring
"Configuring
57
Setting Up