Novell NETWARE 6-DOCUMENTATION Manual page 2277

Creating a User Object
Creating a User Template
44
ConsoleOne User Guide
1
Right-click the container that you want to create the User object in > click
New > click User.
2
Fill in the New User dialog box.
Click Help for details.
2a
To apply a template during creation of the user object, select Use
Template.
2b
To set additional user properties during creation of the user object,
select Define Additional Properties.
3
Click OK.
4
If the Set Password dialog box appears, set the user's login password >
click OK.
IMPORTANT:
If this dialog box appears and you cancel it, an eDirectory
password (object-key pair) won't be created for the user account and the user
won't be able to log in unless you set up some other means of authentication, such
as an NMAS password. You can set an eDirectory password later on the Password
Restrictions property page of the User object. If you leave the password blank and
click OK, the User object is created with a blank (null) eDirectory password and the
user can log in without entering a password.
1
Right-click the container that you want to create the Template object in >
click New > click Object.
2
Under Class, select Template > click OK.
3
Fill in the New Template dialog box.
Click Help for details.
3a
To clone an existing Template or User object, select Use Template or
User.
3b
To set template properties immediately after creating the Template
object, select Define Additional Properties.
After clicking OK, you'll see property pages that look similar to
those of a User object. Help is available on all the property pages.
4
Click OK.