Novell NETWARE 6-DOCUMENTATION Manual page 2227

Installing NetWare WebAccess After the NetWare 6 Installation
5
Choose which gadgets you want to configure now and which gadgets you
want to configure later by checking or unchecking the check boxes next
to each gadget type. Then click Next and continue through the rest of the
NetWare 6 installation.
All NetWare WebAccess gadgets are installed automatically when you
install NetWare WebAccess. This screen lets you choose whether to
enable and configure those gadgets now or later. The default is to enable
and configure gadgets later, because during a new server installation the
applications accessed by the gadgets might not have been installed yet. If
you choose to set up gadgets now, you must specify the location (URL)
where you want the gadgets to link to for each application.
If you choose to enable and configure the Mail gadget now, you will need
to specify your e-mail type. You can choose between GroupWise
IMAP, Exchange, Notes, or NIMS.
If you choose to enable and configure your gadgets later, go to
"Configuring Gadgets" on page 13
complete.
If you did not install NetWare WebAccess during the NetWare 6 installation,
you can still install it afterwards by completing the following steps:
1
Insert the NetWare 6 product CD into your NetWare 6 server.
You might need to load CDROM.NLM on the server to access the
NetWare 6 Product CD.
2
From the Novell menu on the NetWare 6 console GUI, select Install.
3
Click Add and browse to the root of the NetWare 6 product CD.
4
Select the PRODUCT.NI file and click OK.
5
Check the NetWare WebAccess component check box and uncheck all
other components or products unless you specifically want to install
them.
6
Continue with Step 4
WebAccess installation.
after the NetWare 6 installation is
and Step 5 on page 11
Installation and Configuration
to complete the NetWare
®
, POP/
11