Novell NETWARE 6-DOCUMENTATION Manual page 1309

86
Novell Native File Access Protocols Installation and Administration Guide
Access Type (1, 2, 3)—Specifies the type of access to be granted to a
specific host. The values it can take are as follows:
Trusted 1
RootAccess 2
ReadWriteAccess 3
Host/Hostgroup (1, 0)—This field shows whether the Host Name
specified is a Host or a Hostgroup. This field should always be set to 1
(Host).
Example of an exported directory:
/nfsvol nfs-sun2 3 1
/nfsvol nfs-sun2 2 1
/nfsvol nfs-sun2 1 1
/nfsvol * 3 1
/nfsvol * 2 1
/nfsvol * 1 1
Removing an Exported Path
To remove an exported path, delete the corresponding directory entries from
the files NFSTHOST and NFSEXPRT.
Getting the UNIX information from Remote NIS
For file system sharing by NFS server, the UNIX user and group information
is obtained from eDirectory by default. This can be modified so that UNIX
information is obtained from a remote NIS server. To set this, do the
following:
1
Run NFSSTOP.
2
In the NFS.CFG file, set the parameters as follows:
NDS_ACCESS=0
NIS_CLIENT_ACCESS=1
NIS_DOMAIN= nis domainname
NIS_SERVER= servername which is servicing the specified domain
3
Run NFSSTART.
4
Load NFSSERV.