Novell NETWARE 6-DOCUMENTATION Manual page 1569

Mode
Failback
To set FTP Server Start, Failover, and Failback modes, do the following:
1
In ConsoleOne, double-click the cluster object container.
2
Right-click the cluster resource object shared vol name_SERVER and
select Properties.
3
Click the Policies tab on the property page.
4
View or change the Start, Failover, or Failback mode.
Settings
AUTO, MANUAL,
DISABLE
Configuring with Cluster Services
Description
AUTO allows FTP Server
to automatically move
back to its preferred node
when the preferred node
is brought back online.
MANUAL prevents FTP
Server from moving back
to its preferred node
when that node is
brought back online until
you are ready to allow it
to happen.
DISABLE causes FTP
Server to continue
running in an online state
on the node it has failed
to.
Default = DISABLE
51