Novell NETWARE 6-DOCUMENTATION Manual page 2229

Configuring Gadgets
NetWare WebAccess allows only minor configuration changes to the included
gadgets. The only gadget configuration changes supported in NetWare
WebAccess include editing the URL to the service or application and adding
or removing gadgets from the main NetWare WebAccess Web page. If you
want additional gadgets or the ability to create or customize gadgets, you must
purchase Novell Portal Services.
Gadgets are represented in eDirectory as Gadget objects and are created
during the NetWare WebAccess installation. ConsoleOne
make changes to gadget configuration.
1
In ConsoleOne, browse and select the NetWare WebAccess object.
2
On the right side of the ConsoleOne window, right-click the
WebAccess_portalgroup object and then click Properties.
A Property page appears displaying the current configuration settings for
each of the NetWare WebAccess gadgets.
3
Click Configure > Next.
A wizard appears that will take you through the process for configuring
NetWare WebAccess gadgets.
You can also click the Clear Configuration button to clear the current
configuration settings for each gadget.
4
Check or uncheck the check box for each gadget to enable or disable each
NetWare WebAccess service.
If a check box is not checked, that gadget will not appear on the main
NetWare WebAccess page and users will not have access to that service
through NetWare WebAccess.
5
Continue through the wizard to provide the URL and other necessary
configuration information for each service you selected in
See "Additional Gadget Configuration" on page 14
information on gadget URLs and other required configuration
information for each gadget.
The Address Book and Change Password gadgets do not require URLs or
any additional configuration.
6
Review the information on the Summary screen and click Finish to save
the gadget configuration changes.
You can also click the Back button to go back through the wizard and
change configuration settings for each gadget.
TM
for more specific
Installation and Configuration
is required to
Step 4.
13