Novell NETWARE 6-DOCUMENTATION Manual page 1673

From the Select Range Type drop-down menu, choose one of the
following:
Dynamic DHCP: A range of addresses used by the DHCP server
to assign addresses to clients making only DHCP requests. If the
Dynamic DHCP range type is assigned, the DNS Update Option
parameter can be enabled. If Always Update is selected, the
DHCP server will update DNS as dynamic addresses are
assigned and released
Dynamic BOOTP: A range of addresses used by the DHCP
server to assign addresses to clients making only BOOTP
requests.
Dynamic BOOTP and DHCP: A range of addresses used by the
DHCP server to assign addresses to clients making either DHCP
or BOOTP requests. If the Dynamic BOOTP and DHCP range
type is assigned, the DNS Update Option parameter can be
enabled. If Always Update is selected, the DHCP server will
update DNS as dynamic addresses are assigned and released.
Dynamic DHCP with Automatic Host Name Generation: A
range of addresses used by the DHCP server to assign addresses
to clients making only DHCP requests. Hostnames for this pool
will be generated and entered into the DNS system. Hostnames
are provided to clients as a DHCP option. If you choose this
option, ensure that you create the corresponding IN-
ADDR.ARPA zone.
Excluded: A range of addresses that is excluded by the DHCP
server while assigning IP addresses.
If the Dynamic DHCP with Automatic Host Name Generation range
type is assigned, the Auto Host Name Starts With parameter can be
set. This parameter appends a unique integer to the hostname,
generating a unique hostname for each client.
Additionally, the name of the DHCP Server can be specified by
selecting it from the DHCP Server drop-down menu.
Comments: Type your comments about the Subnet Address Range in
this box. This is an optional parameter.
99
Setting Up