Novell NETWARE 6-DOCUMENTATION Manual page 2267

Creating an Object
34
ConsoleOne User Guide
1
Right-click the container that you want to create the object in > click New
> click Object.
There are restrictions on the types of objects you can create in different
container types. For details, see the documentation for your particular
task or application.
2
Under Class, select the type of object > click OK.
3
If you get a warning that no snap-in is available to create the object,
complete the appropriate action from the table below, depending on your
level of understanding of the object you are creating.
Understanding Level
Thorough—you understand
this object type and how its
properties are used.
Minimal—you understand
what the object is but not how
its properties are used in any
detail.
4
In Name, enter a name for the new object.
If it's an eDirectory object, be sure to follow proper naming conventions.
See Novell eDirectory Administration Guide >
details.
5
Specify any other information requested in the dialog box.
Click Help for details. (If you are using generic editors, no details are
available.)
6
Click OK.
Action
Click Yes in the warning box.
You will be allowed to set the object's
mandatory properties using generic editors.
After creating the object, you can set other
properties using the generic Other property
page.
Click No in the warning box > quit this
procedure.
You will need to install a product that
provides a ConsoleOne snap-in to create
and manage this object type.
Naming Conventions for