Logging On To Windows; Logging On As A Tnc User - HEIDENHAIN ITNC 530 User Manual

15.2 Starting an iTNC 530
Application

Logging on to Windows

After you have switched on the power supply, the iTNC 530 starts
booting automatically. When the input dialog for logging on to
Windows appears, there are two possibilities for logging in:

Logging on as a TNC user

Logging on as a local administrator
Logging on as a TNC user
Enter the user name "TNC" in the User name input box. Leave the
Password input box blank and press the OK button.
The TNC software is automatically started. The status message
Starting, please wait... appears in the iTNC Control Panel. .
Do not open or use any other Windows programs as long
as the iTNC Control Panel is displayed (see figure). When
the iTNC software has successfully started, the Control
Panel minimizes itself to a HEIDENHAIN symbol on the
task bar.
This user identification permits very limited access to the
Windows operating system. You are neither allowed to
change the network settings, nor are you allowed to install
new software.
670 15 iTNC 530 with Windows 2000 (Option)