Switching Or Logging Out Users - HEIDENHAIN TNC 620 User Manual

HEROS functions | User administration
The number of characters must match the dictionary check
Minimum number of characters changed compared to previous
password
If the new password does not meet the requirements, an error
message will be issued. This means that you have to enter a
different password.

Switching or logging out users

Use the Switch off HEROS menu item or the icon of the same
name at bottom right in the menu bar to open the Switch off and
restart window.
The control provides the following options:
Switch-off:
The control stops and ends all additional programs and
functions
The system is shut down
The control is switched off
Restart:
The control stops and ends all additional programs and
functions
The system is restarted
Log out:
The control ends all additional programs
The user is logged out
The login window appears
To continue, you need to log in a new user and
enter his password.
The NC program continues running under the
previously logged-on user.
Switch user:
The login window appears
The user is not logged out
You can close the login window with Cancel
without entering a password.
All additional programs and the NC programs
started by the logged-on user continue running.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
10
425