HEIDENHAIN ITNC 530 User Manual page 487

Input parameters
Space angle A?: Rotational angle SPA around the fixed
machine axis X (see figure at top right). Input range:
from –359.9999° to +359.9999°
Spatial angle B?: Rotational angle SPB around the
fixed machine axis Y (see figure at top right). Input
range: from –359.9999° to +359.9999°
Spatial angle C?: Rotational angle SPC around the
fixed machine axis Z (see figure at center right). Input
range: from –359.9999° to +359.9999°
Continue with the positioning properties (see
"Specifying the Positioning Behavior of the PLANE
Function" on page 498).
Abbreviations used
Abbreviation Meaning
spatial = in space
SPATIAL
SPA spatial A: rotation about the X axis
SPB spatial B: rotation about the Y axis
spatial C: rotation about the Z axis
SPC
HEIDENHAIN iTNC 530
Example: NC block
5 PLANE SPATIAL SPA+27 SPB+0 SPC+45 .....
487