Highlighting NC blocks in the graphics
Shift the soft-key row.
To highlight the NC block selected in the left window
in the 3-D line graphics in the right window, set the
MARK THIS ELEMENT OFF / ON soft key to ON.
To not highlight the NC block selected in the left
window in the 3-D line graphics in the right window,
set the MARK THIS ELEMENT OFF / ON soft key to
OFF.
Block number display ON/OFF
Shift the soft-key row.
To show block numbers: Set the SHOW OMIT BLOCK
NR. soft key to SHOW.
To omit block numbers: Set the SHOW OMIT BLOCK
NR. soft key to OMIT.
Erase the graphic
Shift the soft-key row.
Delete graphic: Press CLEAR GRAPHIC soft key.
HEIDENHAIN iTNC 530
131