HEIDENHAIN ITNC 530 User Manual page 371

Angle increment Q378 (incremental): Angle by which
the entire slot is rotated. The center of rotation is at
the center of the pitch circle.
Number of repetitions Q377: Number of machining
operations on the pitch circle.
Feed rate for milling Q207: Traversing speed of the
tool in mm/min while milling.
Climb or up-cut Q351: Type of milling operation with
M03.
+1 = climb milling
–1 = up-cut milling
Depth Q201 (incremental value): Distance between
workpiece surface and bottom of slot.
Plunging depth Q202 (incremental value): Infeed per
cut. Enter a value greater than 0.
Finishing allowance for floor Q369 (incremental
value): Finishing allowance in the tool axis.
Feed rate for plunging Q206: Traversing speed of
the tool while moving to depth in mm/min.
Infeed for finishing Q338 (incremental value):
Infeed per cut. Q338=0: Finishing in one infeed.
HEIDENHAIN iTNC 530 371