HEIDENHAIN ITNC 530 User Manual page 610

13.2 Software Numbers and
Option Numbers
Function
The following software numbers are displayed on the TNC screen
after the MOD functions have been selected:
NC: Number of the NC software (managed by HEIDENHAIN)
PLC: Number and name of the PLC software (managed by your
machine tool builder)
Feature Content Level (FCL): Development level of the software
installed on the control (see "Feature content level (upgrade
functions)" on page 7)
DSP1 to DSP3: Number of the speed controller software
(managed by HEIDENHAIN)
ICTL1 and ICTL3: Number of the current controller software
(managed by HEIDENHAIN)
In addition, coded numbers for the options available on your control
are displayed after the abbreviation OPT:
No options active
Bit 0 to bit 7: Additional control loops
Bit 8 to bit 15: Software options
610
%0000000000000000
%0000000000000011
%0000001100000011
13 MOD Functions