Changing The Table Structure - HEIDENHAIN ITNC 530 User Manual

Changing the table structure

Cutting data tables constitute so-called "freely-definable tables" for
the TNC. You can change the format of freely definable tables by using
the structure editor. You can also switch between table view (default
setting) and form view.
The TNC can process up to 200 characters per row, and
up to 30 columns.
If you insert a column into an existing table, the TNC does
not automatically shift the values already entered.
Calling the structure editor
Press the EDIT FORMAT soft key (2nd soft-key level). The TNC
opens the editing window (see figure), in which the table structure
is shown rotated by 90°. In other words, a line in the editing window
defines a column in the associated table. The meanings of the
structure commands (header entries) are described in the table
below.
Exiting the structure editor
Press the END key. The TNC changes data that was already in the
table into the new format. Elements that the TNC could not convert
into the new structure are indicated with a hash mark # (e.g., if you
have narrowed the column width).
Structure
Meaning
command
NR Column number
NAME Overview of columns
TYPE N: Numerical input
C: Alphanumeric input
WIDTH Width of column. For type N including algebraic
sign, comma, and decimal places.
DEC Number of decimal places (max. 4, effective
only for type N)
ENGLISH Language-dependent dialogs
to (max. 32 characters)
HUNGARIA
HEIDENHAIN iTNC 530 195