HEIDENHAIN ITNC 530 User Manual page 460

Edit the datum table in the Programming and Editing mode of
operation
After you have changed a value in a datum table, you must
save the change with the ENT key. Otherwise the change
may not be included during program run.
Select the datum table in the Programming and Editing mode of
operation.
To call the file manager, press the PGM MGT key, see
"File Management: Fundamentals" on page 95.
Display the datum tables: Press the soft keys SELECT
TYPE and SHOW .D.
Select the desired table or enter a new file name.
Edit the file. The soft-key row comprises the following
functions for editing:
Function
Select beginning of table
Select end of table
Go to previous page
Go to next page
Insert line (only possible at end of table)
Delete line
Confirm the entered line and go to the beginning of
the next line
Add the entered number of lines (reference points)
to the end of the table
460
Soft key
8 Programming: Cycles