HEIDENHAIN ITNC 530 User Manual page 7

Feature content level (upgrade functions)
Along with software options, significant further improvements of the
TNC software are managed via the Feature Content Level. Functions
subject to the FCL are not available simply by updating the software
on your TNC. These functions are identified in the manual with FCL n,
where n indicates the sequential number of the feature content level.
You can purchse a code number in order to permanently enable the
FCL functions. For more information, contact your machine tool
builder or HEIDENHAIN.
FCL-2 functions
3-D line graphics
Virtual tool axis
USB support of block devices (memory
sticks, hard disks, CD-ROM drives)
Filtering of externally created contours
Possibility of assigning different depths
to each subcontour in the contour
formula
DHCP dynamic IP-address
management
Touch-probe cycle for global setting of
touch-probe parameters
smarT.NC: Graphic support of block
scan
smarT.NC: Coordinate transformation
smarT.NC: PLANE function
Location of use
The TNC complies with the limits for a Class A device in accordance
with the specifications in EN 55022, and is intended for use primarily
in industrially-zoned areas.
HEIDENHAIN iTNC 530
Description
page 128
page 80
page 113
page 514
page 433
page 617
User's Manual - Touch
Probe Cycles
smarT.NC Pilot
smarT.NC Pilot
smarT.NC Pilot
7