Overview of MOD functions
Depending on the selected mode of operation, you can make the
following changes:
Programming and Editing:
Display software numbers
Enter code number
Set data interface
Machine-specific user parameters (if provided)
HELP files (if provided)
Load service packs
Test Run:
Display software numbers
Enter code number
Setting the data interface
Showing the Workpiece in the Working Space
Machine-specific user parameters (if provided)
Displaying HELP files (if provided)
In all other modes:
Display software numbers
Display code digits for installed options
Select position display
Unit of measurement (mm/inches)
Programming language for MDI
Select the axes for actual position capture
Axis traverse limits
Display reference points
Display operating time
HELP files (if provided)
HEIDENHAIN iTNC 530
609