Assign
This function sets the destination for the transferred data.
Applications:
Transferring values with Q parameter function FN15
Transferring values with Q parameter function FN16
The TNC mode of operation determines whether the PRINT or PRINT
TEST function is used:
TNC mode of operation
Program Run, Single Block
Program Run, Full Sequence
Test Run
You can set PRINT and PRINT TEST as follows:
Function
Output data via RS-232
Output data via RS-422
Save data to the TNC's hard disk
Save the data in the same directory as the
program with FN15/FN16.
File names
Data
Operating mode
Values with FN15
Program run
Values with FN15
Test Run
Values with FN16
Program run
Values with FN16
Test Run
614
Transfer function
PRINT
PRINT
PRINT TEST
Path
RS232:\....
RS422:\....
TNC:\....
- vacant -
File name
%FN15RUN.A
%FN15SIM.A
%FN16RUN.A
%FN16SIM.A
13 MOD Functions