HEIDENHAIN ITNC 530 User Manual page 662

Specifications
Interpolation
Block processing time
3-D straight line without radius
compensation
Axis feedback control
Traverse range
Spindle speed
Error compensation
Data interfaces
Ambient temperature
Accessories
Electronic handwheels
Touch probes
662
Line in 4 axes
Line in 5 axes (subject to export permit) (software option 1)
Arc in 2 axes
Arc in 3 axes with tilted working plane (software option 1)
Helix:
Combination of circular and linear motion
Spline:
Execution of splines (3rd degree polynomials)
3.6 ms
0.5 ms (software option 2)
Position loop resolution: Signal period of the position encoder/1024
Cycle time of position controller: 1.8 ms
Cycle time of speed controller: 600 µs
Cycle time of current controller: minimum 100 µs
Maximum 100 m (3 937 inches)
Maximum 40 000 rpm (with 2 pole pairs)
Linear and nonlinear axis error, backlash, reversal spikes during circular movements,
thermal expansion
Stick-slip friction
One each RS-232-C /V.24 and RS-422 / V.11 max. 115 kilobaud
Expanded data interface with LSV-2 protocol for remote operation of the TNC through
the data interface with the HEIDENHAIN software TNCremo
Ethernet interface 100 Base T
approx. 2 to 5 megabaud (depending on file type and network load)
USB 2.0 interface
For connection of pointing devices (mouse)
Operation: 0 °C to +45 °C (32 °F to 113 °F)
Storage: –30 °C to +70 °C (–22 °F to 158 °F)
One HR 420 portable handwheel with display or
One HR 410 portable handwheel or
One HR 130 panel-mounted handwheel or
Up to three HR 150 panel-mounted handwheels via HRA 110 handwheel adapter
TS 220: 3-D touch trigger probe with cable connection, or
TS 640: 3-D touch trigger probe with infrared transmission
TT 130: 3-D touch trigger probe for workpiece measurement
14 Tables and Overviews