The Tnc Search Function - HEIDENHAIN ITNC 530 User Manual

The TNC search function

With the search function of the TNC, you can search for any text within
a program and replace it by a new text, if required.
Searching for texts
If required, select the block containing the word you wish to find.
Select the search function: The TNC superimposes
the search window and displays the available search
functions in the soft-key row (see table of search
functions).
Enter the text to be searched for. Please note that the
+40
search is case-sensitive.
Start the search process: The TNC displays the
available search options in the soft-key row (see the
table of search options).
If required, change the search options.
Start the search process: The TNC moves to the next
block containing the text you are searching for.
Repeat the search process: The TNC moves to the
next block containing the text you are searching for.
End the search function.
Search functions
Show the superimposed window containing the
last search items. Use the arrow keys to select a
search item and confirm with the ENT key.
Show the superimposed window containing
possible search items of the current block. Use
the arrow keys to select a search item and
confirm with the ENT key.
Show the superimposed window containing a
selection of the most important NC functions.
Use the arrow keys to select a search item and
confirm with the ENT key.
Activate the Find/Replace function.
124
Soft key
4 Fundamentals of NC, File Management, Programming Aids, Pallet Management