Setting The Data Interfaces; Setting The Rs-232 Interface; Setting The Rs-422 Interface; Setting The Operating Mode Of The External Device - HEIDENHAIN ITNC 530 User Manual

13.5 Setting the Data Interfaces

Function
To set up the data interfaces, press the RS-232 / RS-422 SETUP soft
key to call a menu for setting the data interfaces:

Setting the RS-232 interface

The mode of operation and baud rates for the RS-232 interface are
entered in the upper left of the screen.

Setting the RS-422 interface

The mode of operation and baud rates for the RS-422 interface are
entered in the upper right of the screen.
Setting the OPERATING MODE of the external
device
The functions "Transfer all files," "Transfer selected file,"
and "Transfer directory" are not available in the operating
modes FE2 and EXT.

Setting the BAUD RATE

You can set the BAUD RATE (data transfer speed) from 110 to 115 200
baud.
External device
PC with HEIDENHAIN software
TNCremo for remote operation of
the TNC
PC with HEIDENHAIN data transfer
software TNCremo
HEIDENHAIN floppy disk units
FE 401 B
FE 401 from prog. no. 230 626 03
HEIDENHAIN floppy disk unit
FE 401 up to prog. no. 230 626 02
Non-HEIDENHAIN devices such as
punchers, PC without TNCremo
HEIDENHAIN iTNC 530
Operating
Symbol
mode
LSV2
FE1
FE1
FE1
FE2
EXT1, EXT2
613