HEIDENHAIN ITNC 530 User Manual page 634

13.13 Selecting the Axes for
Generating L Blocks
Function
The axis selection input field enables you to define the current tool
position coordinates that are transferred to an L block. To generate a
separate L block, press the ACTUAL-POSITION-CAPTURE soft key.
The axes are selected by bit-oriented definition similar to programming
the machine parameters:
Axis selection %11111: Transfer the X, Y, Z, IV, and V axes
Axis selection %01111: X, Y, Z, IV. Transfer the axis
Axis selection %00111: Transfer the X, Y and Z axes
Axis selection %00011: Transfer the X and Y axes
Axis selection %00001: Transfer the X axis
634 13 MOD Functions