HEIDENHAIN ITNC 530 User Manual page 10

Functions changed in 340 49x-01 since the
predecessor versions 340 422-xx and 340 423-xx
The layouts of the status display and additional status display were
redesigned (see "Status Displays" on page 44).
Software 340 490 no longer supports the small resolution in
combination with the BC 120 screen (see "Visual display unit" on
page 39).
New key layout of the TE 530 B keyboard unit (see "Operating
panel" on page 40)
The entry range for the EULPR precession angle in the PLANE EULER
function was expanded (see "Defining the Machining Plane with
Euler Angles: EULER PLANE" on page 490)
The plane vector in the PLANE EULER function no longer has to be
entered in standardized form (see "Defining the Machining Plane
with Two Vectors: VECTOR PLANE" on page 492)
Positioning behavior of the CYCL CALL PAT function modified (see
"Calling a cycle in connection with point tables" on page 301)
The tool types available for selection in the tool table were increased
in preparation for future functions.
Instead of the last 10, you can now choose from the last 15 selected
files (see "Choosing one of the last files selected" on page 105)
10