Editing Text Blocks - HEIDENHAIN ITNC 530 User Manual

Conversational programming
Hide thumbs Also See for ITNC 530:
Table of Contents

Advertisement

Editing text blocks

You can copy and erase text blocks of any size, and insert them at
other locations. Before carrying out any of these editing functions, you
must first select the desired text block:
To select a text block, move the cursor to the first character of the
text you wish to select.
Press the MARK BLOCK soft key.
Move the cursor to the last character of the text you
wish to select. You can select whole lines by moving
the cursor up or down directly with the arrow keys—
the selected text is shown in a different color.
After selecting the desired text block, you can edit the text with the
following soft keys:
Function
Delete the selected text and store temporarily
Store marked block temporarily without erasing
(copy)
If desired, you can now insert the temporarily stored block at a
different location:
Move the cursor to the location where you want to insert the
temporarily stored text block.
Press the INSERT BLOCK soft key for the text block
to be inserted.
You can insert the temporarily stored text block as often as desired.
To transfer the selected text to a different file,
Select the text block as described previously.
Press the APPEND TO FILE soft key. The TNC
displays the dialog prompt Destination file =
Enter the path and name of the target file. The TNC
appends the selected text to the end of the specified
file. If no target file with the specified name is found,
the TNC creates a new file with the selected text.
To insert another file at the cursor position,
Move the cursor to the location in the text where you wish to insert
another file.
Press the READ FILE soft key. The TNC displays the
dialog prompt File name =
Enter the path and name of the file you want to insert.
138
Soft key
4 Fundamentals of NC, File Management, Programming Aids, Pallet Management

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Itnc 530 e

Table of Contents