12.6 Optional Block Skip
Function
In a test run or program run, the TNC can skip over blocks that begin
with a slash "/":
To run or test the program without the blocks
preceded by a slash, set the soft key to ON.
To run or test the program with the blocks preceded
by a slash, set the soft key to OFF.
This function does not work for TOOL DEF blocks.
After a power interruption the control returns to the most
recently selected setting.
Erasing the "/" character
In the Programming and Editing mode you select the block in which
the character is to be erased.
Erase the "/" character.
604
12 Test Run and Program Run