Chapter 6: User Authentication; Configuring User Accounts - SMC Networks TigerStack II SMC8926EM Management Manual

Chapter 6: User Authentication

You can restrict management access to this switch and provide secure network
access using the following options:
• User Accounts – Manually configure management access rights for users.
• Authentication Settings – Use remote authentication to configure access rights.
• HTTPS Settings – Provide a secure web connection.
• SSH Settings – Provide a secure shell (for secure Telnet access).
• Port Security – Configure secure addresses for individual ports.
• 802.1X – Use IEEE 802.1X port authentication to control access to specific ports.
• IP Filter – Filters management access to the web, SNMP or Telnet interface.

Configuring User Accounts

The guest only has read access for most configuration parameters. However, the
administrator has write access for all parameters governing the onboard agent. You
should therefore assign a new administrator password as soon as possible, and
store it in a safe place.
The default guest name is "guest" with the password "guest." The default
administrator name is "admin" with the password "admin."
Command Attributes
• Account List – Displays the current list of user accounts and associated access
levels. (Defaults: admin, and guest)
• New Account – Displays configuration settings for a new account.
- User Name – The name of the user.
(Maximum length: 8 characters; maximum number of users: 16)
- Access Level – Specifies the user level.
(Options: Normal and Privileged)
- Password – Specifies the user password.
(Range: 0-8 characters plain text, case sensitive)
• Change Password – Sets a new password for the specified user.
6-1