C
ONFIGURING THE
CLI – The following example configures LACP parameters for ports 1-6.
Ports 1-4 are used as active members of the LAG; ports 5 and 6 are set to
backup mode.
Console(config)#interface ethernet 1/1
Console(config-if)#lacp actor system-priority 3
Console(config-if)#lacp actor admin-key 120
Console(config-if)#lacp actor port-priority 128
Console(config-if)#exit
. .
.
Console(config)#interface ethernet 1/6
Console(config-if)#lacp actor system-priority 3
Console(config-if)#lacp actor admin-key 120
Console(config-if)#lacp actor port-priority 512
Console(config-if)#end
Console#sh lacp sysid
Channel Group
-------------------------------------------------------------------
Console#show lacp 1 internal
Channel group : 1
-------------------------------------------------------------------
Oper Key : 120
Admin Key : 120
Console#
Displaying LACP Port Counters
You can display statistics for LACP protocol messages.
Counter Information
Field
LACPDUs Sent
LACPDUs Received
Marker Sent
3-90
S
WITCH
System Priority
1
2
3
4
5
6
Table 3-6. LACP Port Counter Information
Description
Number of valid LACPDUs transmitted from this
channel group.
Number of valid LACPDUs received on this channel
group.
Number of valid Marker PDUs transmitted from this
channel group.
System MAC Address
32768
00-00-E9-31-31-31
32768
00-00-E9-31-31-31
32768
00-00-E9-31-31-31
32768
00-00-E9-31-31-31
32768
00-00-E9-31-31-31
32768
00-00-E9-31-31-31
4-132
4-154
4-155
4-157
4-158
4-158