Authentication Method Objects - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 45 Authentication Method
Click Show Advance Setting and select Enable Extended Authentication.
2
Select Server Mode and select an authentication method object from the drop-
3
down list box.
Click OK to save the settings.
4
Figure 489 Example: Using Authentication Method in VPN

45.2 Authentication Method Objects

Click Configuration > Object > Auth. Method to display the screen as shown.
Note: You can create up to 16 authentication method objects.
Figure 490 Configuration > Object > Auth. Method
The following table describes the labels in this screen.
Table 210 Configuration > Object > Auth. Method
LABEL
Add
Edit
Remove
Object
References
742
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Select an entry and click Object References to open a screen that shows
which settings use the entry. See
example.
Section 13.3.2 on page 297
ZyWALL USG 2000 User's Guide
for an