Dsx-1 Dte Loopback - Paradyne HotWire 7974 User Manual

Testing

DSX-1 DTE Loopback

"
6-8
DSX-1 DTE Loopback loops the DSX-1 signal back to itself before the signal is
sent to the Framer.
CAP
DSL
All Ones
Port
Transceiver
Procedure
To run a DSX-1 DTE Loopback:
1. Position the cursor at the Start command next to DSX-1 DTE Loopback on
the Network & DSX-1 Tests screen.
2. Press Enter.
The Start command is changed to Stop.
3. To manually stop the test, verify that the cursor is positioned at the Stop
command and press Enter.
A DSX-1 DTE Loopback cannot be started when any other loopback test is in
progress.
August 1999
CAP T1
LIU
Framer Framer
DSX-1
Port
98-16110
7970-A2-GB20-00