Paradyne HotWire 7974 User Manual page 162

Index
Configuration Mode, choosing an interface mode, 3-7
connecting
to a system terminal, 3-4
to the DSL network, 3-3
to the DTE, 3-3
connectors
COM Port, C-4
EIA-530-A Port, C-7
Location, 1-5
power input, C-5
rear panel, C-1
CPU Fail, self-test result, 5-5
create login ID, 8-3
customer configuration, 3-7
switchpacks, internal switches, 4-2
D
data channel loopback (DCLB), 6-11, A-9
data port loopbacks, DTE initiated, A-9
data terminal loopback (DTLB), 6-10, A-9
dc power option, 3-2
default configuration area, 3-7
Default Network Destination, A-20
delete, Login ID, 8-5
device, messages, 7-3– 7-4
dimensions, D-1
Disconnect Time, for Telnet session, A-16, A-18
documents, related, viii
DOS, TFTP server on, 3-12
download code, 3-14
Download Failed, status message, 5-4
DSL Line Rate
effect on AutoRate, A-2
Network Interface Options screen, A-3
switch setting
Models 7974 and 7984, 4-5
Models 7975 and 7985, 4-8
Models 7976 and 7986, 4-10
DSL Mode, A-13
DSL Port, LEDs, 5-16
DSLAM, defined, 1-2
DSX-1
DTE Loopback, 6-8
Interface Option settings, A-4
LED, 5-16
network interface pin assignments, C-6
Repeater Loopback, 6-7
DSX-1 Failed, self-test result, 5-5
IN-2
DTE, connecting, 3-3
DTE loopback , 6-8, 6-15
DTE-initiated loopbacks, A-9
E
E1 network interface, pin assignments, C-6
EER (Excessive Error Rate) , status message, 5-3
effective access level, 8-2
EIA-530-A Port Interface Connector, C-7
EIA-530-A-to-V.35 Cable Interface, C-12
ElasticStore, A-9
ending an ATI session, 2-8
enterprise, SNMP traps, B-3
Enterprise Specific Traps, enabling, A-28
environment requirements, D-1
error messages, line 24, 7-3
error statistics, 5-7
ESD precautions, 4-2
Excessive Error Rate (EER) Threshold, A-2
F
factory defaults, 3-7
resetting, 8-6
Failure, self-test result, 5-5
feature numbers, D-1
features, 1-2
features of unit, 1-2
ferrite choke, installation, 3-3
firmware
download from server, 3-14
select with switch
Models 7974 and 7984, 4-5
Models 7975 and 7985, 4-8
Models 7976 and 7986, 4-10
Framing, A-10
Front Panel LEDs, 1-4
G
G.703, Repeater Loopback test, 6-14
G.703 Interface Options, A-10
G.703 network interface, pin assignments, C-6
General SNMP Management Options, A-22
General Traps, enabling, A-27
H
health and status messages, 5-3
August 1999 7970-A2-GB20-00