Test Status Messages - Paradyne HotWire 7974 User Manual

Monitoring the Unit

Test Status Messages

5-6
The Test Status messages in the following table appear in the right column of the
System and Test Status screen.
Table 5-3. Test Status Messages
Test Status Message Meaning
No Test Active No tests are currently running.
LLB Test Active A network Line Loopback test is active.
RLB Test Active A Repeater Loopback test is active.
DTLB Test Active A Data Terminal Loopback test is active.
DCLB Test Active A Data Channel Loopback test is active.
DLB Test Active A DTE Loopback test is active.
511 Test Active A 511 Test and Monitor is active on the DSL network interface.
Remote LLB Up Active A Remote Line Loopback Up command is being sent.
Remote LLB Dn Active A Remote Line Loopback Down command is being sent.
Remote DCLB Up A Remote Data Channel Loopback Up command is being sent.
Active
Remote DCLB Dn A Remote Data Channel Loopback Down command is being
Active sent.
Lamp Test Active The Lamp Test is active, causing the LEDs on the front panel to
light.
Telco LLB Active A Telco-initiated line loopback is active on the DSX-1 port.
Telco PLB Active A Telco-initiated payload loopback is active on the DSX-1 port.
For further information on testing, refer to Chapter 6,
August 1999
Testing
.
7970-A2-GB20-00