Paradyne HotWire 7974 User Manual page 94

Messages and Troubleshooting
7-4
Table 7-1. Device Messages (2 of 2)
Device Message What Message Indicates
Invalid Test A loopback or pattern test
Combination was in progress when Start
was selected to start the
test, or was active on the
same interface when the
test was selected.
Limit of six Login IDs An attempt to enter a new
reached login ID was made, and the
limit of six login/password
combinations has been
reached.
No Security Records Delete was selected from
to Delete the Administer Login
screen, and no security
records had been defined.
Password Matching Password entered in the
Error – Re-enter Reenter Password field of
Password the Administer Logins
screen does not match
what was entered in the
Password field.
Please Wait Command takes longer
than 5 seconds.
Test Active A test is running and no
higher priority health and
status messages exist.
August 1999
What To Do
H
Wait until other test ends.
H
Abort all tests from the Test
menu screen.
H
Stop the test from the same
screen the test was started
from.
1. Delete another login/password
combination.
2. Reenter the new login ID.
H
No action needed.
H
Enter a security record.
H
Try again.
H
Contact your system
administrator to verify your
password.
Wait until message clears.
H
Contact service provider if test
initiated by the network.
H
Wait until the other test ends
and message clears.
H
Cancel all tests from the Test
screen.
H
Stop the test from the same
screen the test was started
from.
7970-A2-GB20-00