DTE Loopback
7984-A2-GB20-10
DTE Loopback loops the DSX signal back to itself before the signal is sent to the
Framer.
CAP
DSL
All Ones
Port
Transceiver
Procedure
To run a DTE Loopback:
1. Position the cursor at the Start command next to DTE Loopback on the
Network Tests screen.
2. Press Enter.
The Start command is changed to Stop.
3. To manually stop the test, verify that the cursor is positioned at the Stop
command.
4. Press Enter.
A DTE Loopback cannot be started when any other loopback test is in progress.
February 1999
CAP
T1
LIU
Framer
Framer
Testing
DSX-1
Port
98-16110
5-5