Paradyne HotWire 7974 User Manual page 165

T
T1 network interface, pin assignments, C-6
Telco-initiated
line loopback, 6-18
loopback, enable/disable, A-13
payload loopback, 6-19
remote line loopback, 6-19
Telnet session
access, 8-1
access level, A-18
enable/disable, A-18
inactivity timeout, A-16, A-18
login required, A-18
options, A-17
terminal
communication parameters, 3-4
connecting, 3-4
settings required, 3-4
terminal port, direct connection, 2-1
test
aborting, 6-17
Data Channel Loopback, 6-11
Data Terminal Loopback, 6-10
DTE Loopback, 6-8, 6-15
G.703 Repeater Loopback, 6-14
LED, 5-16
Line Loopback, 6-3
menu, 6-1, 6-13
Network-Initiated DCLB, A-8
Port (DTE) Initiated Loopbacks, A-9
Remote Send Line Loopback, 6-4
Repeater Loopback, 6-7
Send and Monitor 511, 6-5
status messages, 5-6
switch setting for telco loopback, 4-5
switch setting for telco remote loopback, 4-5
Telco-initiated, 6-18
terminating, 6-17
Test Duration, A-13
Test Timeout, A-13
7970-A2-GB20-00
Time Slot16, configuration option, A-11
timeout
Com port session inactivity, A-16
Telnet session inactivity, A-18
transmit clock inversion, A-8
transmit clock source, A-7
traps
SNMP, 7-2
SNMP standards compliance, B-1
support of, 1-7
troubleshooting, 7-5
DSL performance statistics, 5-9
DSX-1 performance statistics, 5-11
error statistics, 5-7
G.703 performance statistics, 5-13
U
UNIX, TFTP server on, 3-12
user interface, 3-4
async terminal, 2-1
how to access, 2-1
resetting/restoring access, 8-6
V
V.35 interface, C-13
V.54 Loop 3. See data terminal loopback (DTLB)
virtual function keys, 2-7
W
warmStart, B-1
weight of unit, D-1
August 1999
Index
IN-5