H G.703 Interface Options (Models 7976, 7986 - Paradyne HotWire 7974 User Manual

Configuration Option Tables
G.703 Interface Options (Models 7976, 7986)
Î
A-10
For G.703 Interface Options, refer to Table A-4. To access the G.703 Interface
Options screen, follow this menu selection sequence:
Main Menu Configuration
main/config/G.703
Framing:
Line Coding:
Line Framing:
Time Slot 16:
Send (AIS) on Network Failure:
Primary Clock Source:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Table A-4. G.703 Interface Options – Models 7976 and 7986 (1 of 2)
Framing
Possible Settings: Framed, Unframed
Default Setting: Framed
Specifies whether G.704 framing is used for the G.703 interface.
Framed – The unit conforms to G.704 framing.
Unframed – G.704 framing is disabled.
Line Coding Format
Possible Settings: AMI, HDB3
Default Setting: HDB3
Specifies the line coding format to be used by the G.703 interface.
AMI – Indicates the line coding format used by the G.703 interface is Alternate Mark
Inversion (AMI).
HDB3 – Indicates the line coding format used by the G.703 interface is HDB3.
August 1999
Load Configuration From
G.703 INTERFACE OPTIONS
Framed
HDB3
noCRC4
Signaling
Enable
G703
G.703
Hotwire
Model: 79x6
Î Î
MainMenu Exit
7970-A2-GB20-00