Accessing The Test Menu - Paradyne HotWire 7974 User Manual

Testing

Accessing the Test Menu

Î
Select . . .
Network and DSX-1 Tests
Network Tests
Network and G.703 Tests
SYNC Data Port Tests
Device Tests
Abort All Tests
7970-A2-GB20-00
From the Test menu, you can run network tests, data port tests, and a front panel
lamp test.
To access the Test menu, follow this menu selection sequence:
Main Menu Test
main/test
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
On . . .
Models 7974 and 7984
Models 7975 and 7985
Models 7976 and 7986
Models 7975 and 7985
All models
All models
August 1999
TEST
Network & DSX-1 Tests
Network Tests
Network & G.703 Tests
SYNC Data Port Tests
Device Tests
Abort All Tests
To . . .
Start and stop tests on the DSX-1 or network interface.
Start and stop tests on the network interface.
Start and stop tests on the G.703 or network interface.
Start and stop tests on the SYNC Port interface.
Start and stop lamp test.
To abort all current tests excluding network-initiated
loopback tests. An aborted test may continue to run for a
few seconds as the abort command is sent to the
remote end and processed.
6
Hotwire
Model: 79xx
(Models 7974, 7984)
(Models 7975, 7985)
(Models 7976, 7986)
(Models 7975, 7985)
Î Î
MainMenu Exit
6-1