Dsx-1 Dte Loopback - Paradyne 7974 User Manual

8. Testing

DSX-1 DTE Loopback

A DSX-1 DTE Loopback loops the DSX-1 signal back to itself before the signal is
sent to the Framer.
Procedure
To run a DSX-1 DTE Loopback:
The DSX-1 DTE Loopback cannot be started when any other loopback test is in
progress.
8-8
CAP
DSL
All Ones
Port
Transceiver
1. Position the cursor at the Start command next to DSX-1 DTE Loopback on the
Network & DSX-1 Tests screen.
2. Press Enter.
The Start command is changed to Stop.
3. To manually stop the test, verify that the cursor is positioned at the Stop
command and press Enter.
December 2001
CAP T1
LIU
Framer Framer
DSX-1
Port
98-16110
7900-A2-GB21-20