Paradyne HotWire 7974 User Manual page 110

Configuration Option Tables
DSX-1 Interface Options (Models 7974, 7984)
Î
A-4
For DSX-1 Interface Options, refer to Table A-2. To access the DSX-1 Interface
Options screen, follow this menu selection sequence:
Main Menu Configuration
main/config/DSX–1
Line Coding:
Line Framing:
Line Equalization:
Excessive Error Rate Threshold:
Send (AIS) on Network Failure:
Send All Ones on DSX-1 Failure: Enable
Primary Clock Source:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Table A-2. DSX-1 Interface Options – Models 7974 and 7984 (1 of 2)
Line Coding Format
Possible Settings: AMI, B8ZS
Default Setting: B8ZS
Specifies the line coding format to be used by the DSX-1 interface.
AMI – Indicates the line coding format used by the DSX-1 interface is Alternate Mark
Inversion (AMI).
B8ZS – Indicates the line coding format used by the DSX-1 interface is B8ZS.
Line Framing
Possible Settings: ESF, D4
Default Setting: ESF
Specifies the framing format to be used by the DSX-1 interface.
H
Line Framing is only available when the unit is configured as an LTU. The NTU is
automatically configured to match the framing format used by the LTU.
ESF – ESF framing formatting is used for transmitted and received data over the DSX-1
Interface.
D4 – D4 framing format is used for transmitted and received data over the DSX-1
Interface.
August 1999
Load Configuration From
DSX–1 INTERFACE OPTIONS
B8BS
ESF
0 -133
1E-4
Enable
DSX-1
DSX
Hotwire
Model: 79x4
Î Î
MainMenu Exit
7970-A2-GB20-00