H Snmp Management Capabilities; Management Information Base (Mib) Support - Paradyne HotWire 7974 User Manual

About the Hotwire 79xx Standalone Termination Unit
SNMP Management Capabilities

Management Information Base (MIB) Support

1-6
The Hotwire 79xx Termination Units support SNMP Version 1, and can be
managed by any industry-standard SNMP manager and accessed using SNMP
by external SNMP managers.
For a detailed description of the supported MIBs, visit Paradyne's Web site at
www.paradyne.com. Select Service & Support
The following MIBs are supported:
H
MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with
a network management protocol in TCP/IP internets and provides general
information about the unit. MIB II is backward-compatible with MIB I.
H
DS1/E1 MIB (RFC 1406) – Models 7974, 7976, 7984, and 7986. Reports the
performance status of the DSX-1 or G.703 interface and supports the
features found on the DSX-1 or G.703 Performance Statistics screen.
H
RS-232-Like MIB (RFC 1659) – Defines objects for managing RS-232-type
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports the synchronous
data port on the DSU.
H
Entity MIB (RFC 2037) – Stores information about each device connected to
the DSLAM card. This enables the NMS to display graphical information
about each one of the endpoints.
H
Paradyne Enterprise MIB – Supports configuration, status, statistics, and
tests.
H
Generic Interface MIB Extensions (RFC 1229) — Models 7976 and 7986.
Supports control of tests on the E1 interface not supported by the previous
MIBs.
August 1999
MIBs.
7970-A2-GB20-00