Network Line Loopback - Paradyne HotWire 7974 User Manual

Network Line Loopback

"
7970-A2-GB20-00
Network Line Loopback loops the received signal on the network interface back
to the network without change.
CAP CAP
DSL
Port
Transceiver Framer
Procedure
To run a Network Line Loopback:
1. Position the cursor at the Start command next to Network Line Loopback on
the Network & DSX-1, Network, or Network & G.703 Tests screen.
2. Press Enter.
The Start command is changed to Stop.
3. To manually stop the test, verify that the cursor is positioned at the Stop
command and press Enter.
Network Line Loopback cannot be started when a Repeater Loopback, DTE
Loopback, Remote DCLB, network-initiated Line Loopback, or Telco-initiated
tests are in progress.
August 1999
T1
AIS
DSX-1
LIU
Port
Framer
98-16112
Testing
6-3