Paradyne HotWire 7974 User Manual page 140

Standards Compliance for SNMP Traps
B-6
enterpriseTestStart/Stop
Interface
Variable-Bindings
H
Synchronous ifIndex (RFC 1573)
Data Ports
H
ifAdminStatus (RFC 1573)
H
ifOperStatus (RFC 1573)
H
ifTestType (RFC 1573)
The following objects control tests
in SNMP-managed devices:
– noTest – Stops the test in
progress.
– testLoopDCLB – Initiates a Data
Channel Loopback.
– testLoopDTLB – Initiates a Data
Terminal Loopback
– testSendDCLBUp – Initiates an
DCLB Up message to the
remote unit.
– testSendDCLBDown – Initiates
an DCLB Down message to the
remote unit.
August 1999
Possible Cause
H
enterpriseTest Start – Any
one of the following tests is
active on the port:
– Data Terminal Loopback
– Data Channel Loopback
– Remote Data Channel
Loopback
H
enterpriseTest Stop – No tests
currently running on the
interface.
7970-A2-GB20-00