Snmp Traps - Paradyne HotWire 7974 User Manual

Standards Compliance for

SNMP Traps

SNMP Traps
warmStart
authenticationFailure
7970-A2-GB20-00
This section describes the unit's compliance with SNMP standards and any
special operational features for the SNMP traps supported. The Hotwire 7974
Standalone Termination Unit supports the following traps:
H
warmStart
H
authenticationFailure
H
linkUp and linkDown
SNMP Trap Description
warmStart The unit has reinitialized
itself.
The trap is sent after the
unit resets and stabilizes.
There are no
variable-bindings.
SNMP Trap Description
authenticationFailure Failed attempts to access
the unit.
There are no
variable-bindings.
August 1999
B
Possible Cause
H
Reset command.
H
Power disruption.
Possible Cause
Three unsuccessful attempts
were made to enter a correct
login/password combination.
B-1