H Snmp Management Capabilities; Management Information Base (Mib) Support; Snmp Traps Support - Paradyne Hotwire 7975 User Manual

SNMP Management Capabilities

Management Information Base (MIB) Support

SNMP Traps Support

Router
7975-A2-GB20-40
The termination unit supports SNMP Version 1, and can be managed by any
industry-standard SNMP manager and accessed using SNMP by external SNMP
managers.
For a detailed description of supported MIBs, visit Paradyne's web site at
http://www.paradyne.com. The following MIBs are supported:
H
MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with
a network management protocol in TCP/IP internets and provides general
information about the unit. MIB II is backward-compatible with MIB I.
H
RS-232-Like MIB (RFC 1659) – Defines objects for managing RS-232-type
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports the synchronous
data port on the DSU.
H
Enterprise MIB – Supports configuration, status, statistics, and tests.
The 7975 Standalone Termination Unit supports traps as defined in
RFC 1215. They may include variable-bindings specified in the following MIBs:
H
MIB II (RFC 1573) – Defines the general objects for use with a network
management protocol in TCP/IP internets and provides general information
about the 7975 Standalone Termination Unit. MIB II is backward-compatible
with MIB I.
H
Enterprise MIB – Supports configuration, status, statistics, and tests.
Figure 1-4 illustrates a typical M/SDSL SNMP configuration. Refer to Chapter 8,
IP Addressing
and Appendix B,
V.35
7975
Figure 1-4. M/SDSL SNMP Configuration
December 1998
About the Hotwire 7975 Standalone Termination Unit
Standards Compliance for SNMP Traps
8775
SDSL
AC
T5A
250V
48V RTN
A B A B
EOC DC FUSES
T4A, MIN. 48V FAN DC PWR
AC 5 .
4 6
INPUT 3 .
2 . . ALM A B
1
48VDC CLASS 2 OR A B STACK IN OUT SERIAL MCC 1
LIMITED PWR SOURCE POSITION
8600 Ethernet
DSLAM Interface
.
Operation, Maintenance
and Provisioning Center
Network
SNMP NMS
3
2
1
2 3
Ethernet
LAN
Data
Voice
98-15858
1-5