Snmp Management Capabilities; Management Information Base (Mib) Support; Snmp Trap Support - Paradyne HOTWIREt 7984 User Manual

SNMP Management Capabilities

Management Information Base (MIB) Support

SNMP Trap Support

Router
7984-A2-GB20-10
The termination unit supports SNMP Version 1, and can be managed by any
industry-standard SNMP manager and accessed using SNMP by external SNMP
managers.
For a detailed description of supported MIBs, visit Paradyne's web site at
http://www.paradyne.com. The following MIBs are supported:
MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with
a network management protocol in TCP/IP internets and provides general
information about the unit. MIB II is backward-compatible with MIB I.
DS1 MIB (RFC 1406) – Reports the performance status of the DSX-1
interface and supports the features found on the DSX-1 Performance
Statistics screen.
RS-232-Like MIB (RFC 1659) – Defines objects for managing RS-232-type
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports the synchronous
data port on the DSU.
Enterprise MIB – Supports configuration, status, statistics, and tests.
The 7984 Standalone Termination Unit supports traps as defined in RFC 1215.
Figure 1-4 illustrates a typical M/HDSL SNMP configuration. Refer to Chapter 8,
IP Addressing and Appendix B,
DSX-1
7984
Figure 1-4. HDSL SNMP Configuration
February 1999
About the Hotwire 7984 Standalone Termination Unit
Standards Compliance for SNMP Traps
8784
DSL
AC
T5A
250V
48V RTN
A B A B
EOC
DC FUSES
T4A, MIN. 48V FAN DC PWR
AC 4 5 6 .
3
INPUT .
2 1 . . ALM A B
48VDC CLASS 2 OR A B STACK IN OUT SERIAL MCC 1 2
LIMITED PWR SOURCE POSITION
8600 Ethernet
DSLAM Interface
.
Operation, Maintenance
and Provisioning Center
Network
SNMP NMS
3
2
1
3
Ethernet
LAN
Data
99-16114a-01
1-5