1. About Standalone TDM SDSL Termination Units
SNMP Management Capabilities
Hotwire 797x Standalone Termination Units support SNMP Version 1, and can be
managed by any industry-standard SNMP manager and accessed by external
SNMP managers using SNMP.
Management Information Base (MIB) Support
For a detailed description of the supported MIBs, visit Paradyne's Web site at
www.paradyne.com. Select Technical Support
The following MIBs are supported:
T
T
T
T
1-6
MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with
a network management protocol in TCP/IP internets and provides general
information about the unit. MIB II is backward-compatible with MIB I.
DS1/E1 MIB (RFC 1406) – Models 7974 and 7976. Reports the performance
status of the DSX-1 or G.703 interface and supports the features found on the
DSX-1 or G.703 Performance Statistics screen.
RS-232-Like MIB (RFC 1659) – Defines objects for managing RS-232-type
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports the synchronous
data port on the DSU.
Paradyne Enterprise MIB – Supports configuration, status, statistics,
and tests.
December 2001
MIBs.
7900-A2-GB21-20