Sheets Are Not Aligned - Ricoh Pro C7500 Original Instructions Manual

Solution:
Straighten out the sheet.
1. Load the sheets the other way up.
2. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
3. In [Detailed settings] for the custom paper you are using, select 1321: [Correct Paper
Curl], and then specify "П Curl Correction Level: Small".
4. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
5. In [Detailed settings] for the custom paper you are using, select 1321: [Correct Paper
Curl], and then specify "П Curl Correction Level: Large".
6. Print the image. Are the problems of trailing edge remaining and curling resolved?
Yes Finished!
No Go to the next step.
7. Is the paper curled downward?
Yes Cannot be solved by this flow.
No Load the sheets the other way up again, and then repeat Step 3 to 6. If the problem
still persists, contact your service representative.

Sheets Are Not Aligned

The trailing edge of the sheets delivered to the stacker tray are aligned by the paddle. If the delivered
sheets are flat, the friction at the trailing edge increases and affects the alignment of the sheets parallel to
the paper feed direction. Also, when the leading edge stopper stops the leading edge of paper, the
paper may be stopped with the leading edge protruding, resulting in horizontal misalignment when
stacked.
High Capacity Stacker
309