Ricoh Pro C7500 Original Instructions Manual page 277

6. Check if the skew is resolved.
Yes Finished!
No Go to the next step.
7. To feed paper from Extension output banner sheet tray, attach the side fences and end
fence for extra-long paper. For paper with a length of 487.8 mm (19.2 inches) or above,
change the maximum stack height from 50 mm to 40 mm (2.0 inches to 1.6 inches).
For details, see page 279 "Attaching the Side Fences, Auxiliary Side Fence, and End Fence (for
Long Paper)".
Otherwise, go to the next step.
8. Check if the skew is resolved.
Yes Finished!
No Go to the next step.
9. If stacking paper exceeding a length of 487.8 mm (19.2 inches) on Extension Vacuum
Feed Banner Sheet Tray Type S14, reduce the number of stacked sheets according to the
lower level as indicated on the stacking height decal.
M0EDIC1396
10. Remove the tab sheet holder or small tab end fence.
11. In [Detailed settings] for custom paper, select 1301: [2-Tray LCIT: Paper Feed Mode] and
set [Paper Feed Mode:Fan Level] to [Prevent Double Feed (Weaker Blow)].
12. Check if the skew is resolved.
Yes Finished!
No Go to the next step.
13. In [Detailed settings] for custom paper, select 1301: [2-Tray LCIT: Paper Feed Mode] and
set [Paper Feed Mode:Fan Level] to [Prevent Double Feed (Weakest Blow)].
14. Check if the skew is resolved.
Yes Finished!
Vacuum Feed LCIT RT5150
275